Feature
Through the use of an originally-developed clamp roller system, vibrations are kept to a minimum even at high reamer RPMs.
It helps to ensure highly efficient production by shortening cleaning time.
Step 1
During installation, the only input required is a pneumatic hose.
Step 2
Push the switch down to make the reamer begin rotating at high speed.
Step 3
With the switch held down, insert the torch into the slot to clean it.
Step 4
The torch does not vibrate or move while it is being cleaned, as it is held securely in place with an originally-developed clamp system.
Step 5
The scraped off spatter will be collected without scattering.
Step 6
Release the switch, and cleaning is complete.
Step 7
When the device is not being used for cleaning, insert the torch into the slot and use it to store the torch.
Optional
STAND
A dedicated Torch Station stand. The stand is not required to set up the Torch Station.
BRACKET
Bracket for holding anti-spatter liquid Can be attached to the stand and used to hold the container for anti-spatter liquid.
