JustMakeWeb.com รับทำเว็บไซต์ รับทำเว็บโรงแรม รับทำเว็บขายของ รับทำเว็บบริษัท เว็บสำเร็จรูป รับทำเว็บร้านค้า ออกแบบเว็บไซต์ ใช้งานได้ง่าย รองรับ SEO โปรโมท GOOGLE ให้ติดอันดับได้อย่างรวดเร็ว , ลงโฆษณาฟรี VPS ราคาถูก
รับทำเว็บไซต์
0

มีผู้ชม 3268 ครั้ง
NOZZLE CLEANER NCAM-04

Feature

  1. We have created a torch cleaner that does not require an I/O connection
  2. with the robots in use, making it very easy to install.
  3. By developing an original clamp system (4WD) that minimizes
  4. vibrations even when the reamer's rotation speed is high, robots' shock
  5. sensors will not react when their nozzles are being cleaned.
  6. In addition to shortening cleaning time, it always cleans nozzles at a
  7. consistent quality without stopping production lines.

Step 1


ncam-04_01

During installation, the only input required is a pneumatic hose.
Communication with the robots in use is unnecessary.

Step 2


ncam-04_02

The welding nozzle is inserted into the clamp rollers.

Step 3


ncam-04_03 ”ncam-04”
When the nozzle presses down on the switch, the reamer starts rotating at high speed and cleaning begins.
The torch does not vibrate or move while it is being cleaned, as it is held securely in place with an originally-developed clamp system (4WD).
 

Step 4


ncam-04_04

Spatter that has been scraped off the nozzle can be crushed and collected together in one place without scattering.

Step 5


ncam-04_05
The nozzle is pulled back up and cleaning is complete.